Those searching for high-quality Resistor Variable Wire Wound Non components like part number R90135-01-0001 by Ai Tek Instruments Llc can count on NSN Distributor and our expansive inventory of top-quality NSN parts to supply you with dependable products. The NSN 5905012338466, among others, is readily available for purchase at any time on our database. When you have had time to browse through our offerings, we encourage you to take the next step by requesting a quote on items of interest for your comparisons. To do this, complete the form found on this page, making sure to include relevant details like your desired part quantity and target budget. With this information, our team will craft a solution that meets your operational requirements.
Note : We Will Not Share Your Information To Any Third Parties.
At NSN Distributor, we prioritize providing our customers only the highest caliber NSN products, including those with the CAGE Code 1XP56 and FSC 5905 Resistors. To do this, we choose to source all of our inventory from leading manufacturers that we trust like Ai Tek Instruments Llc. Moreover, many parts undergo extensive quality assurance measures to guarantee their caliber prior to purchase. Commence procurement with a competitive quote for NSN 5905-01-233-8466 today and see how simple parts purchasing can be. For one-on-one assistance, you can also call or email us at any time, as we are available around the clock!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-233-8466 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 012338466 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 318-160HS-50K | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.078 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.235 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | DATA RECONSTR |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 0.047 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 82227-R90135/01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote